Home         Products      Reseller     Contact      Accessories  Documentation
USBCNC-FAD-SW
  • Help menu with a list of all commands
  • Allows normal connection to a remote RS-232 host PC.
  • View list of files on USB key from a remote PC
  • Directory listing
  • DNC operation
  • Mid tape start with text search option
  • Baud rate change command
  • Punch of tooling and program data to USB key
  • Punch of tooling data only
  • Punch of current program only
  • Punch of all programs
  • Punch of machine parameters
  • Punch machine's survey data
  • View USB file directory from a remote PC
  • Tape input for file loading to CNC memory
  • View command to verify the proper file has been selected prior to upload or DNC operation
USBCNC-FAD-SW

USBCNC controller with integral DNC firmware. Includes serial port pass through for connection to existing serial networks.

 USBCNC-FAD-SW  

 The USBCNC-FAD disk reader control acts as an interface between commercially available USB flash memory and any Fadal CNC 88. The addition of a Calmotion USBCNC controller allows users to load and punch programs to any commercially available USB memory device. The USBCNC-FAD-SW also contains integrated DNC functionality for drip feed operation of large files. (Tested to 500 GB w/external USB hard drive.) Once in DNC mode, cycle time is optimized by simply pressing the Start button on the Fadal pendant to repeat the program indefinitely. The proximity of the USBCNC-FAD-SW to the control ensures the highest baud rate communication possible with a Fadal CNC.

The USBCNC-FAD-SW allows users to maintain their exiting serial networks by operating in pass through mode. Normal serial interface is maintained. In USB mode, the operator can load, punch and DNC files from any USB memory device. 

The internal switch box version of the USBCNC controller is compatible with all serial DNC software including Fadal NC, Predator, and MasterCam.

The USB connection provides an alternative method of transferring and/or sending programs via DNC should serial connections become problematic. This helps to ensure  productivity is not lost should a host PC or a serial network fail. Operators can instantly choose their CNC file  source. (Remote PC or panel mount USB key) No A/B switch boxes or other physical connections are required once installed.
>>click for USBCNC-FAD-SW data sheet

USBCNC-FAD-SW       $525.00
 (Internal version/pendant mount only. Installation required)
Home  |   Products  |   Resellers  |   Contact   |   Links  |   Documentation Calmotion.Com © 2008