The USBCNC disk reader control acts as an interface between commercially available USB flash memory and any CNC control with an available RS-232 port. Machine tool files can be sent from CNC memory to the USB key, USB key to CNC memory or drip fed (DNC) from the USB key. Flexible DNC firmware is built into the USBCNC unit allowing connection to just about any machine tool CNC
control. No hardware or software upgrades are required on the machine. Included with controller purchase:

       - 1 GB USB flash key                                    -Modular serial cable

       - Wall plug power supply                          

       - Modular Male and Female DB25 serial port connectors

        >> click for more info
 

USBCNC-FAD USB controller for Fadal CNC 88

USB flash key reader controller that acts an interface between commercially available USB flash memory and any version of Fadal CNC88 controller. The USBCNC-FAD controller accepts keypad
input commands from the Fadal control pendant. A help menu provides program as well as tooling information to be stored or loaded between the CNC memory and a USB key. Machine parameters
can also be stored for easy loading during machine maintenance. No hardware or software
upgrades are required on the machine. Included with controller purchase:

       - 1 GB USB flash key                                    -25 foot DB25 cable

       - Wall plug regulated 5V power supply

      - Machine magnet with printed command set

                                                            >> click for more info

USBCNC-FAD                   $650.00
External mount Fadal CNC88 USB controller. Includes power supply, 1 GB USB key and
25 foot serial cable.

USBCNC-FAD-INT             $550.00
Pendant mount Fadal CNC88 USB controller. Includes cables for pendant mounting,
waterproof panel mount USB connector, power plug for connection to CNC 5V supply
and 1 GB USB key.

USB-1030                        $50.00
Cable for USBCNC-FAD to Fadal 1030 card. -3 and later systems only.

USBCNC-FAD-SW USB controller for Fadal CNC 88 with network switch pass though
USB flash key reader controller that acts an interface between commercially available USB flash memory and any version of Fadal CNC88 controller. The USBCNC-FAD-SW controller accepts keypad
input commands from the Fadal control pendant and allows connection with a remote PC as well. Auto-sensing circuit connects PC or USB to the CNC without physically changing network cables or connections . Included with controller purchase:

       - 1 GB USB flash key                            -15 footUSB cable

                                                                         - Panel mount USB plug                      - Power supply cable

                                                                      >> click for more info

Our online ordering system is handled through PayPal. PayPal, an Ebay company, is a global leader
in online transactions and maintains a safe and secure site. Once your cart is complete, you will be automatically redirected to a PayPal site where your credit information can be entered. If you do
not have a PayPal account, continue through the order entry system and a choice to use
MasterCard, AMEX, Visa, or Discover is available. 



MC104P PC104 controller

MC104P controller - Embedded PIC18F8722 from Microchip packaged in a PC/104 form factor controller. Use as a standalone controller or add PC/104 I/O expansion
 boards as needed for your application.  (PC/104 drives, high resolution analog modules, communication, motion control cards,..... )                 

       - 128K Flash Memory                                    -132K SRAM

       - 1K EEPROM                                                   -40MHZ Clock

       - Full PC/104 I/O addressing capability  -ICD2 connector

       -2 Serial Ports (1 RS-232/RS-485, 1 RS-232)

- 4 Analog Inputs 0-5V, 10 bits     - 8 Digital Outputs, Open Collector 40V/400mA                       

- 8 Digital Inputs (4 tied to high speed interrupts or IRQ lines)

MC104P                 $99.00
Microcontroller in PC104 form factor

MC104P-XP            $109.00
MC104P in PC104 form factor with extended pins for stack-through operation.