Home         Products      Reseller     Contact      Links Documentation
  

LANCNC-MAZ

 In addition to storage capability, files can be easily accessed as a remote ftp site on a network. This allows a user to back up copies of CMT files as well as the ability to quickly share files across multiple machines. Standard software that comes with a PC, such as Internet Explorer from Microsoft, can be used to access machine files. There are no additional license requirements. A backlit 4 line LCD display with 3 button input is used to select files and directories for file management at the CNC

The LANCNC-MAZ provides almost unlimited data storage capability of Mazak CMT type files. Operators can save and recall files with an easy to use operator interface (4 line LCD display) included with the LANCNC-MAZ.

 LANCNC-MAZ 

 The LANCNC-MAZ controller acts as a data storage device for Mazak CNC machines that use the CMT-I/O interface. The LANCNC-MAZ can be used to replace the cassette tape or floppy drive units used with legacy Mazak controls such as the Mazak T1, M2,....

The trouble and effort of managing unreliable media used in the cassette tape and floppy disks is eliminated by replacing dated storage media with a modern SD card flash device. The SD card used is non-proprietary and is the same type that is used in digital cameras. A 2 GB SD card is provided as standard, but larger versions can be substituted.

Ethernet access can be left unconnected and is not required to store and recall Mazatrol CMT files. If desired, the SD card can be easily removed and replaced as needed.
>>LANCNC-MAZ manual (supplemental to LANCNC manual)

 
Home  |   Products  |   Resellers  |   Contact   |   Links  |   Documentation Calmotion.Com © 2009