The
DC104 2 amp drive is a
PC/104 compatible brush
DC drive with all of its
parameters and commands
accessible with any
PC/104 compatible
controller. Digital and
analog I/O of all types
can be integrated using
the rugged and proven PC/104
platform. The open
standard PC/104 platform
allows engineers to add
wired and wireless networks
to create custom
drive solutions quickly
without dependence on
proprietary software and
hardware. By embedding the
drive into the control bus,
analog conversion time and
noise issues are
eliminated. Embedding the
control into the drive also
saves valuable panel space
compared to a separately
mounted PLC and drive.
- DC Drive
2 amp nominal / 3
amp peak
- Reversing and non-reversing
models
- Accepts 85 -
255 VAC single phase input,
42 - 62 HZ input
- 16KHZ switching frequency.
No audible switching noise
- Standard
RS-232 serial port
- 2 analog inputs ( +/- 10VDC)
- 1 analog output (0 - 10VDC,
requires +12VDC on the
PC/104 stack)
- Optically isolated
enable circuit with
selectable 5, 12, 24
volt interface
- Internal process PID
loop
- Voltage and
velocity loop modes
(w/optional encoder
feedback)
- Form factor close to
unity for smooth, cool
running motors.
- ETL listed to
ANSI/UL Std 508C
>>
click for data sheet
Non-reversing
PC/104 Interface $279.00
Serial port version
$149.00
Non-reversing
w/encoder feedback
PC/104 Interface $309.00
Serial port version
$179.00
Reversing
PC/104 Interface $299.00
Serial port version
$169.00
Reversing w/encoder feedback
PC/104 Interface $329.00
Serial port version
$199.00
Encoder
Option
Software
Scope
